1 / 1
Robot Mower Garage Prototype
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
Created this for my mower. Printed it with 15% infill it is very stable.
For "glas" i took regular "acrylic glass film".
You have to cut the parts with slicer to the size of your printer.
After printing you have to glue them together with a good plastic glue.
You can cover the cuts with “cover-clip”
I used regular “superglue” which did work wonderful on “left” part. But on “right” part my glue got not dry and my model crashed. So i have no pictures of complete printed model but it works well and is very stable