Raspberry Pi Zero Flirc Case Tripod Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small bracket to mount a Pi Zero Flirc Case onto a tripod
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
About
This model is a small bracket which can be used to mount a Raspberry Pi Zero enclosed in a Flirc Case onto a tripod for camera projects.
The bracket features a standard ¼ inch screw hole, which is the de-facto standard among consumer cameras and tripods.
There are two holes in the bracket, which are used to mount the bracket onto the Flirc Case.
Additional required parts:
- 2x M2.5x12mm
Due to the bracket adding to the overall thickness, you need two longer screws to assemble everything together.
Material & Settings I used:
- Prusament PLA
- 0.2 mm layer height
Installation:
Remove two screws of either short side of the Flirc Case, attach the bracket onto the Case and align the holes. Take the two long screws, stick them through the holes in the bracket and screw them into the case securing everything together. Don't overtighten.
In the end it should look somewhat like in the attached pictures (except for the messy double sided tape residue, shhhh!)
Happy printing!