Nintendo Wii Controller Stand with enclosure for the Wiimote sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of schnurrri's design, I added an enclosure on the back for storing the Wiimote silicone sleeves
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 823
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the amazing Wii stand made by @schnurrri_331469. The original model can be downloaded here: https://www.printables.com/model/410815-nintendo-wii-controller-stand
I've added an enclosure for storing the Wiimote silicone sleeves, it can store either 2 normal sized sleeves or 2 of the longer sleeves meant for holding the Wiimote + Wii Motion Plus.
I also have added openings for the lock mechanism from the Nunchuck's connector, as shown below:
The file Wii_Stand_Text.stl is the same as the one from the original model, I just included it here for completeness sake. Btw, it was very tricky to print it correctly, my printer's extruder kept yanking the letters from the printer bed, so I had to print it at very low speeds. Here are the settings I used with Orca Slicer in case anyone's interested (I printed them in PLA, layer height was 0.2 and bed temp was 60ºC):
