1 / 4
Mastercraft 12-1/2-in Planer Shroud For Vacuum 31.2mm(1-1/4inch) — zdjęcie 1
1 / 4

Mastercraft 12-1/2-in Planer Shroud For Vacuum 31.2mm(1-1/4inch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wood chip shroud to allow hooking dust collection to a this model of planer, 31.2mm(1-1/4inch) vacuum attachment

Ocena
0 / 5
Polubienia
5
Pobrania
39
Wydruki
0
Wyświetlenia
148
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I recently bought a planer that didn't come with any sort of shroud to hook up to a vacuum to keep the dust and wood chip mess to a minimum.

I have split the long parts in half so that they would fit on a normal printer bed size.

I printed this part in ABS for strength, but ASA would suffice. I probably would not recommend PLA since its too weak for something like this.

you can swap out the vacuum attachment for one that is sized for you, mine was designed for a 31.2mm(1-1/4inch) vacuum attachment. 33.7mm is the outer diameter of the attachment, so if your attachment has that other dimension on the shroud side it should fit..

For gluing the parts together SA super glue would work, but two part epoxy would be best.

  • 2 loops .5mm width
  • 25% infill
  • Brim + Organic Tree Support

Appreciate any feed back, Happy Wood Working!

 

Tagi