1 / 1
Absaugung für Ständerbohrmaschinen / suction drilling machine
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zum Absaugen der Bohrspäne habe ich dieses flexible System konstruiert und montiert.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 246
- Wydruki
- 0
- Wyświetlenia
- 1462
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (61)Powiązane
Teile 22 / 22B / 22C
Material PLA
Layerhöhe 0,2 mm
Infill 10 %
Support 5% Tree
Teil 22A
Material TPU95
Layerhöhe 0,2 mm
Infill 100 %
Support 0
TPU A95 von 3DJake
Dieses Filament ist auch druckbar mit Bowden-Extruder.
This filament is also printable with Bowden extruder
https://www.3djake.at/3djake/tpu-a95-hellblau