1 / 3
Leg/Kick Stand for Wacom Cintiq Pro 24
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a leg to fix the broken kick stand for the Wacom Cintiq Pro 24.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Did the kick stands on your Wacom Cintiq Pro 24 shattered their internal mounting points because of Wacom's garbage brittle plastic? This is for you. This leg attaches to the mounting points for the VESA monitor arm plate and provides additional support.
This might also work for the Pro 32, but I don't have one to try. If you try it and it works please leave a comment!
For installing the legs:
- Bolt the leg in a little snug in the slots towards the short end of the leg. It should not move on its own, but should move if you tug on it.
- Flip the tablet screen up
- Reach underneath to slide the leg until the tablet is supported properly and level.
- Flip the tablet over and tighten the screws. Don't over tighten the screws; they don't need much to stay.
Parts Needed:
2x M4x8mm button or socket cap hex screw per leg (4 total)