1 / 3
Single Extruder - Dual Color - Stingray (fusion360)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Stingray model modified with the dual color technique. The model prints in two part that slide into each other.
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 251
- Wydruki
- 0
- Wyświetlenia
- 993
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (94)Powiązane
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.
Printing info:
- Scaling down can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first, then to scale it as you wish.
- Split the model to its parts before printing them separately then, when done, they should simply slide into each other
- The holes make the model more difficult to print, you will have to take some time (~10min) to clean up the underside by removing all small supports. I recommend using tree supports since they don't cover the holes with a grid like regular support do.
- A brim is recommended aswell to help with bed adhesion.