Lithophane Single Picture Frame With LED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lithophane Photo Night Stand Frame with LED modules.
- Ocena
- 4,5 / 5
- Polubienia
- 49
- Pobrania
- 369
- Wydruki
- 2
- Wyświetlenia
- 2240
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Simple three (printed) and two built in components lithophane night stand photo frame. Ideal for present.
Materials used:
Frame (front and back cover) - PLA Wizards Voodoo (0.4mm nozzle, speed: 30mm/s, LH: 0.2)
Lithophane - PLA Semi Matt White (0.4mm nozzle, speed: 30mm/s+COOLING, LH: 0.15)
LED - VTAC 3LED tiles (4pcs)
Power - 12V, 6.5A, VTAC Power Adapter
TOOLS
Solder iron and hot glue gun. And 3D printer obviously xD
Total size: 190x130x33 mm
TIPS:
Lithophane (created online): Size: 180x120x3mm with frame 3mm - for best fitting try to get 179.5x119.5x3mm size or as close as possible to that size.
ASSEMBLING:
Print front and back cover pieces, and lithophane photo. Cut PowerAdapter cable and pull trough hole at back cover part (3mm hole). Solder wires to LED tiles (connected in series) and glue tiles and cable to back cover with hot glue just to make sure everything is nice and tidy.
Put Lithophane photo to Frame and if necessary hot glue it (from inside) to sides of frame.
Close Frame with back cover and if necessary hot glue it on two places with small amount of hot glue. (I did just to make sure that everything stay in place)
OPTIONAL
You can add on/off switch to power cable.
Enjoy your project :)
(Sorry for not uploading pictures of assembly process, I decided to late to publish this print )
Feel free to leave comments, ask anything, or give suggestions :)