Wall mount box for Nedis WiFi Smart Switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount enclosure for Nedis Wi-Fi Smart Switches. Attaches to wall with 3mm wood screws. May need more…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A wall mount enclosure for Nedis Wi-Fi Smart Switches. Attaches to wall with 3mm wood screws. May need more substantial screws, but will update once tested. Holes for cable (6.2mm) entries at the top and bottom and a larger hole at the rear of case. Tested to fit the WIFIWS20WT, but should fit the single switch model as well. Maybe even other similar switches?
Uses M3 nuts to fasten the Smart Switch to the case. Use a bolt to pull the nut into the holder slots.
Not yet tried the case in action. But it ought to work!
Print Settings
Printer Brand:
Creality
Printer:
CR-20
No
Supports:
No
0.2
Infill:
20%
Filament:
3DJake rPLA White
Notes:
Prints nicely without any supports.
Category: Electronics