1 / 10
double color mushroom - Fungo doppio colore
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Layer 0.10 mm 3 loop wall Printer MK3S Filament Sunlu PLA Infill 10%, Nozzle Temp 220° and Support 60°
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 679
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (71)Powiązane
ultra-realistic Mushroom with red cap and white dots, but only with the assembly of two pieces.
Layer 0.10 mm
3 loop wall
Slicer BambuStudio, Printer MK3S
Filament Sunlu PLA, White and matte red
Infill 10%, Nozzle Temp 220° and Support 60° 2 plates
SUNLU FILAMENTS
SUPPORT ME:
