Guitar fret wrap, string mute, silencer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A subtle replacement for the FretWrap. It serves to dampen the resonance of the strings between the nut and tuning pegs
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model as a replacement for the FretWrap because I wanted something more discreet than the fabric or leather FretWraps available on the market. It is suitable for a nut width between 42 and 50mm. It's necessary to attach a soft material, such as felt, on the upper part, so that the bottom part can be slid under the strings between the nut and the tuning pegs. The hinged part belongs near the low E string and is therefore widened by about a millimeter. It works 100%.
It can be printed using ABS, PLA, PETG, etc. Supports are not required for printing.