Easier to print CPU Delid tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very small remix of Dawnaur's original CPU Delid tool. I made the square "track",or overhang that the delidder…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1062
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A very small remix of Dawnaur's original CPU Delid tool.
I made the square "track",or overhang that the delidder slider runs between, into a wedge shape. This negates any need for supports and makes the printing of the the parts very easy. The track is quite a snug fit.
I also made the coin slot to fit a 5 euro cent coin since I live in a country that doesn't do 1 and 2 cent coins
A word of warning: I have not tested either of the designs
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
No
Supports:
No
0.1
Infill:
60-100%
Notes:
I used 60% infil for the part 1 and 100% on the part 2 or the slider.
Category: Computer