Star Wars Kyber Crystal Gen 2 Case Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The gen 2 kyber crystals from Galaxy's Edge come with a nice case. These TPU adapters hold the crystal for display.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 1150
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Print these pads in TPU with 2 walls and 10-20% gyroid infill.
They should insert into the kyber crystal case easily and will hold the crystal nicely for display. Black TPU is best as these are intended to blend into the original case and not stand out. I do not recommend a hard filament for these, the pads need to compress for the crystal to be inserted.
Not all the crystals are the exact same length so you may need to adjust the dimensions of the parts in the slicer. These were designed for the largest crystal I had on hand so if you have a shorter one then I suggest stretching the top pad in the Z axis only to make it slightly taller to compensate for shorter crystals.
These will pair nice with the kyber necklace I designed if you want somewhere to store your crystal while not wearing it.
I'm working on a holder for the kyber case for display purposes and will add it to this model when it is complete.