Leg Strap Base Plate with hex key storage for K6ARK CW Key / Morse Code Paddle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love K6ARK morse paddles, but hate losing the 1.5mm hex keys used for adjustment. Problem solved.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If the K6ARK paddle had enough real estate to add a hex key, it would totally be there. Oh, trust me, I tried.
This remix adds a storage location in the strap base print for the 1.5mm hex key used for adjustment on the grub screws for paddle action. It will take any hex key up to 45mm long and 15mm wide, or thereabouts (the slot is actually about 50mm deep and 17mm wide for blog cred).
I bought them in bulk here if you want the same: https://a.co/d/aDaV507 (not affiliate) Is 60 hex keys a little overboard? Yes. But, am I crazy for buying 60 hex keys never fully intending to use them all? Also yes.
Upon printing, it will be tight the first time you insert the hex key. This is BY DESIGN. It will compress the plastic just a little and keep the key from falling out. Resist the urge to twist the key. It's just a storage compartment. Super handy if you're just not getting the feel of your paddle in the middle of operating!