Chair Rollers for Prevention of Scratches on your Floorsurface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We noticed some major scratches on our vinyl floor, there where the chair was dragged over. Now I have built rollers.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We noticed some major scratches on our vinyl floor, there where the chair was dragged over. Now I have built a set of rollers.
For my chairs I found out there are two versions, I bought two more shortly after the purchase of the other chairs. So I needed to build two versions of the main-body.
The roller mainly works after you lifted the chair from behind, that is the idea behind it. The rollers are made from PETG and have one ball bearing inside (BB 623-ZZ) and a dowel pin ø3x20mm. The suspension of the dowl pin consists of right and left TPU rings, with cone shape to provide good and safe seat in the eyelet of the main body.
You should try some preferred softer TPU for some damping effectwhen somebody sits on the chair. Works great! Happy sitting!
Printed on my MK4 (PETG) and MK3 (TPU). Main body with my fsvorite organic support for round suspension holes. No glue, just a perfect print!
Explore my other Printables: https://www.printables.com/de/@Tritschi