PK Squire Stand Dart Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder to store more darts using the Wave 1 Upgrades Stand.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can never have too much ammunition around for your blaster. Since the Wave 1 PK Squire stand didn't allow me to even store the included darts, I added a little holder.
This should be press fit into the existing pocket.
I thought about giving it a little more depth, but it seems to hold the darts just fine and this way it doesn't protrude the original pocket.
Printing instructions
This should print fine with the default settings for your material.
Mine is printed in Prusament PETG Recycled with PrusaSlicer's default 0.20 mm STRUCTURAL preset.
If yours doesn't fit you should be able to scale it up or down in small increments.