Craftsman Table saw miter boards 137.248830
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to secure featherboards to my table saw and it has weird miter grooves so i made a rail to use with Tbolts
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I print them solid.
I use abs.
I used these t bolts. https://www.amazon.com/dp/B0BYJP2GJW?ref=ppx_yo2ov_dt_b_fed_asin_title
The rear bolt clamps down the weird thing in the groove , so the featherboard wont move into the blade. The front just holds the bar to the featherboard. it does not keep it in the channel, the rear does all that.
Featherboard is on thingyverse
Nobs at ace hardware,
and the spacers to make the nobs work are above.
OK The sliding one is tested and working. I removed t bolts in favor of say dry wall screw or similar to attach to a jig.
You need to deburr the first layers outter perimiter as its squishes and is out of spec, i use the underside of the saw table to do so . There is a little ledge on both long sides to remove by scraping it on a 45 on the table edge. a deburring tool would also work. once you remove it it fits perfect.