AXA 3320 Window fastener spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This space can be used to fine tune the distance between the window hook and striker (sluitkom).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Fine tuning AXA window faster - striker distance
The spacers for the AXA 3320 allow you to fine tune the distance between the window fastener and the striker (sluitkom). Drilling holes for the window fastener may not always be precise enough to ensure smooth handle operation.
To find the optimal spacer thickness remove the striker en close the handle bar. Take the thinnest spacer that does not fit between the window frame and the fastener hook.
The part comes in four thicknesses and are coded with a number of small wholes:
- 0.4 mm single hole
- 0.6 mm two holes
- 0.8 mm three holes
- 1.0 mm four holes
When printing use a layer height of 0.2 mm. Additionally avoid PLA as it may degrade too quickly and is not recommended for this application.