PRUSA XL Steel Sheet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for five Prusa XL Steel Sheets.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 176
- Wydruki
- 5
- Wyświetlenia
- 789
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for five Prusa XL Steel Sheets. All sheet sizes fit this holder.
I designed this holder from four parts. Stable with simple design and hexagonal pattern. The possibility of simple color combinations. There is a 15 mm gap between the steel sheets for a better grip. Assembled with screws and nuts.
Dimensions: 290 x 200 x 95,5 mm (length x height x width), 15 mm between the steel sheets
Fasteners:
10x screw M4x10, DIN 965 (I used TORX, stainless steel A2)
10x nut M4, DIN 934
I printed on two programs with PRUSA XL:
BOTTOM + BACK:
- Filament: AURAPOL PLA 3D Galaxy Black
- 0,4 mm nozzle
- 0,20 mm layer
- 3 perimeters
- 15% infill
- Without supports
- Satin steel sheet + glue DIMAFIX
- I added 0.2mm on the X and Y dimensions (correction for my printer to get accurate dimensions)
RIGHT + LEFT SIDE:
- Filament: AURAPOL PLA 3D Galaxy Black
- 0,4 mm nozzle
- 0,20 mm layer
- 2 perimeters
- 15% infill + 100% infill in a hexagonal pattern (I used modifier)
- Without supports
- Textured steel sheet + glue DIMAFIX
- I added 0.2mm on the X and Y dimensions (correction for my printer to get accurate dimensions)
Please show off your print ;-)