Voron 2.4 Draftshift/Toolchanger 350mm Build Extended Full Skirt Bottom Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an Skirt Mod , For the Draftshift/Toolchanger Extended Frame.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 960
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is an Modded Skirt is for an Voron Draftshift/Toolchanger, with an Extended Y frame of 100mm. And Front 2040 Extrusions.
The Front Motors Are Extendet For 2040 Extrusions.
Frame Must be Extendet in Y about 100mm
Front Motors needs to be add 2x m3x16 Screws from the inside. (Total are 4x)
Needs Also to Dowload Motor Mounts from the Modder edwardyeeks.
Also Take an Look at onsimon Backpack Design for the Toolchanger , he made this awesome Rear Middle Skirt Cutout, also available on his git, the whole package with cable channel etc.
For the Front Motor Mounts you can Exceptept like your 2040 Extrusions, if you have M5 you can go wit M5x65 or M5x60 also work also When you have M6, go with m6x65 or M6x65. (Total 2x)
Also an Special Thx and Honor to MicHael, who made this Skirt possible with me. An very great Designer.