1 / 4
Starcraft Galaxy 6 pop-up trailer roof vent cover — zdjęcie 1
1 / 4

Starcraft Galaxy 6 pop-up trailer roof vent cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Galaxy 6 pop-up trailer vent cover

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a model I made for my families pop-up trailer (Starcraft Galaxy 6) We gutted the whole thing and built several more beds (large family) and during one of our camping trips we got very heavy rain and unfortunately we hadn't really put much thought into the vent in the roof. Which promptly began leaking water into the trailer and onto one of the beds. We never ended up using this model because it uses a fair amount of filament. However, that does not mean that it would be the same case for somebody else.

This model has not been tested, however the dimensions are correct to fit the Starcraft Galaxy 6 pop-up trailer specifically (ie it may not fit other trailer vents and will require scaling). Use some sort of outside resistant tape to secure around the base, removal of the original vent cover may be necessary. The model has been split into quarters so it can be printed, you will need to print 4 copies and glue them together. 

Filament: ABS, ASA, PETG

Infill: 30-50% (choose at your own discretion)

Speed: NA (should not matter for this model)

Supports: Yes

Layer Height: 0.2

Brim: Only if you are concerned of detachment from bed

Quantity: 4