Hollow Adalinda
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adalinda without stomach or throat in order to be printable with 1 perimeter layer and 0% infill. Used for upgrading…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Adalinda without stomach or throat in order to be printable with 1 perimeter layer and 0% infill.
Used for upgrading the current guardian dragon having Arduino micro clone and PIR sensor to start pulsing a led within the model when movement is noticed. Current model in use is ~20% infill and then a drilled hole from the base to the stomach cavity.
Needs support in stomach area at least for 1 perimeter/0% settings (see Support_rationale.jpg)
I don't know why the re-mix information doesn't show but this is the original mode: https://www.thingiverse.com/thing:246198
Print Settings
Printer Brand:
Prusa
Printer:
MMU2s
No
Supports:
Yes
0.20 mm
Infill:
0%
Filament:
Fiberlogy PLA Fibersilk Metallic Orange
Category: Interactive Art