Gridfinity RR Parametric Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric Fusion port of Gridifinity Re-Refined bins. Now with customizable magnet or nut holes!
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A parametric Fusion port of Gridifinity Re-Refined bins. Now with customizable magnet or hexnut holes as well as the size, dividors, bottom fillet and label.
Gridifinity RR or Re-Refined is a standard of bins that support 4 ways of attaching to the baseplate: Magnets, hexnuts, the Refined thumbscrew, and just threading screws (not bolts) into the plastic.
Custom size and format:
The size of the bin can be set with the GridX, GridY and GridZ parameters.
The number of dividors can also be adjusted, setting it to 0 will remove them.
The bottom fillet radius can be adjusted, setting it to 0 also disables it.
The label can be disabled on the timeline:
Custom magnet/hexnut holes:
At default settings the slots fit normal M3 nuts and 6x2mm magnets. The size can be changed with parameters, though at higher slot widths the thumbscrew hole needs to be removed by disabling it on the timeline:
The holes are stepped to make them printable with no support, but it can be disabled on the timeline if not desired:
Bin bases:
To obtain a blank 7mm tall bin base revert the timeline to before the “Walls” sketch:
