Galaxy SmartTag 2 Holder for Samsonite "Thermo Young 84cm" Suitcase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conceal a Galaxy SmartTag 2 within the handle assembly of a Samsonite "Thermo Young 84cm" suitcase (circa 2013).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
This custom holder allows you to hide a Galaxy SmartTag 2 inside the handle assembly of a Samsonite "Thermo Young 84cm" suitcase (produced around 2013).
Installation Instructions:
- Remove the handle assembly by unscrewing the four screws located at the bottom of the suitcase.
- Position the holder with the flat side facing down and press it into the slot located behind the contact information holder. The fit should be snug.
- Insert the Galaxy SmartTag 2 into the indent of the holder.
- Reattach the handle assembly by screwing it back on.
Optional: You can add contact information to the bottom of the 3D-printed holder, which will be visible through the suitcase’s transparent plastic cover.
Note: This holder has only been tested with a Samsonite "Thermo Young 84cm" suitcase (circa 2013). Compatibility with other models is not guaranteed, but it may inspire you to find a similar concealed location in your own suitcase.