QHY PoleMaster Faceplate for ZWO AM5 (non-N version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Faceplate replacement for ZWO AM5 to provide mounting options for QHY PoleMaster.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a full replacement of the ZWO AM5 (non-N version) faceplate to allow direct mounting of the QHY PoleMaster.
If you prefer to keep the original faceplate, consider using the add-on QHY PoleMaster Bracket instead.
You can choose from two versions:
Generic Mount Faceplate
this faceplate provides a ¼-20 inch thread to attach the QHY Generic Portable Mount. This allows for easy installation and removal of the PoleMaster as needed.
Additional parts required:
- 1x ¼-20*6*8 threaded insert
- 1x ¼-20 bolt (½ inch length)
Permanent Mount Faceplate
This faceplate allows for permanent installation of the PoleMaster. The camera is directly screwed onto the faceplate.
Additional parts required:
- 3x M3*4*4.2 threaded inserts
Printing notes
- No supports needed. Just print it flat.
- The counterbores are printed upside down and therefore have a sacrificial layer to print cleanly. Just pierce and clear out the counterbores after printing.
- Recommended settings for good rigidity:
- PETG, 0.6mm nozzle
- 0.3mm layer height
- Gyroid, 25% infill
- 4 top and bottom shell layers (or 1.2mm when using other layer heights)
- 4 wall loops (or 2.4mm when using other nozzle sizes)
Designed with Onshape.