8 colors on Anycubic Kobra 3 Combo Splitter for 8 spools with 2 Ace Pro - No support required
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an Anycubic Kobra 3 Combo Splitter for 8 spools to use with 2 Ace Pro - No support required
- Ocena
- 1 / 5
- Polubienia
- 124
- Pobrania
- 847
- Wydruki
- 0
- Wyświetlenia
- 5957
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Please give it a 💖 if you like it 🥰
🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi
You can get a second Ace Pro there:
- on Geekbuying 👉 https://kgy.yt/ganyacepr
- on Amazon 👉 https://amzn.to/3W5So1Q
This is an Anycubic Kobra 3 Combo Splitter for 8 spools to use with 2 Ace Pro. No supports are required.
It is much better to print the body (model1 or model2) with a 0,1 or even 0,05 layer height to make the inside smoother.
In order to have a modular module and easy to diagnostic in case of a problem. I made the model 2 of the Splitter in 3 different parts :
- the top where you add the insert to hold the PTFE tubes
- the middle to limit the PTFE insertion
- the bottom / body that leads the filament to the extruder
Here is my video about it (French) 👉
The inserts for the model 2 can be found from these links:
- on Aliexpress 👉 https://kgy.yt/ainserptfe
- on Amazon 👉 https://amzn.to/3BfnfBF
For the model 2 I also used 2 16mm M3 screws of with 2 M3 nuts:
- on Aliexpress 👉 https://kgy.yt/am316mm
- on Amazon 👉 https://amzn.to/3XYXu1o
Please give it a 💖 if you like it 🥰
As Amazon affiliate, I may earn a little commission on some sales through my affilation links