Prusa XL - Big Spool 5KG spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big spool holder that will mount on the side of the Prusa XL, designed for the 5KG spools from MatterHackers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I needed a spool holder to mount on the side of the Prusa XL that would support the 5KG spools from MatterHackers. Those spools have a smaller than usual center hole. Of course, this will also work for smaller spools as well. I had some extra hardware from the kits so it's designed to use what I had. No reason this shouldn't work on other machines with a similar need.
To mount you will need:
2 x m3 T-slot spring nuts (T-Nuts should also work)
2 x m3 10mm machine screws (and the driver of course)
2 x m3 washers (optional but a good idea)
Printed mine in PETG, PLA would likely work
You might as well go overkill with the print settings, here's what I used
.25mm layer height
8 perimeters
4 top and bottom solid layers
No supports needed, print with the big plate on the print bed
Seems more than strong enough!