Wall Hook for TSO GRS-16 PE v2 Square
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook to wall mount your TSO track saw square
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
There are other hooks for the TSO GRS-16 PE track saw squares but they seemed clunky/harder to use. This includes a curve so its easy to slide the square's edge on until it snaps into place. This is also designed to have only two screws for easy stud mounting. It fits #6, #7 and #8 screws in the countersunk holes. #9 might work but would likely interfere with the square and its fit.
Printed on its side just fine, it likely prints on its back fine as well. PLA worked well - probably works with PETG as well.
Fusion360 files are included - there are no parameters but feel free to make modifications to make this work for you. You could bump the countersink hole features up to fit a #9 if you wanted.