Nerf Pro Torrent Stock - Long Length
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fully 3D printed stock for the Nerf Pro Torrent designed to extend the length of the standard Torrent stock.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 178
- Wydruki
- 0
- Wyświetlenia
- 1004
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello everyone! This is a 3D printed stock for the Nerf Pro Torrent that I have designed to extend the length of the standard Torrent stock. I liked the look of the original stock, but I wasn’t pleased with the length, so I thought it would be fun to model the stock and extend it!
My goals for this project were to make the stock fit stylistically with the blaster while also making it easy to print and assemble. I also wanted to see if it was possible to use a printed spring piece to create the little locks that snap into place when the stock is put onto the blaster. I started by modeling the original stock as closely as I could, then used that as a basis to create an extended version. It felt good, and I loved the way it looked, but it was still short enough that the slide would sometimes pinch my cheek when priming the blaster, which was very unpleasant. So, I decided to make an even longer version to eliminate that fear once and for all.
In the end, the stock consists of 3 printed pieces that require no outside hardware to assemble. The main body of the stock requires some support, and I have included a version of the part that has easy to remove built in supports that should allow the body to be printed without the need for additional support material. But, in case you would rather generate your own support using your own settings you know work well for your printer, I have also included a version of the body that does not include any built-in support. You also have the choice between a snap in spring piece, as well as a snap in lock piece for the stock. The spring piece will allow the stock to be easily pushed on as well as removed, while the lock piece can be snapped in once the stock is in place and will make the removing the stock impossible until the lock piece is removed. Both pieces include built in supports.
This model is not an exact copy of the Torrent’s stock, but hopefully it is a close enough imitation for those who are interested. I had a ton of fun working on this project, and I hope everyone else enjoys these files as much as I have!
Thank you to CheckYourVector for his help with test prints!
Links to my other Nerf Pro Torrent stocks on Printables:
Nerf Pro Torrent Stock - Standard Length: https://www.printables.com/model/1019791-nerf-pro-torrent-stock-standard-length
Nerf Pro Torrent Stock - Medium Length: https://www.printables.com/model/1019843-nerf-pro-torrent-stock-medium-length