1 / 8
Battery/power bank/charger Solder Fume Extractor (air filter)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works from battery and Type-C, built in charging plate, easy to print and assemble, low noise, tripod mount, soft feet.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
In order to assemble the device you will need:
- printable parts made of ABS > PETG > PLA and (optional) feet made of flex (TPU); There are three different caps design. Choose yours!
- 12V 120 mm PC fan;
- 120 mm fan grill;
- M3x6mm screws (4pc);
- Carbon filter welding sponge. Please cut it to fit the chassis;
- TP-4056 charging board;
- 12V DC-DC step-up convertor;
- 18650 Battery (by losing its portability the filter can work w/o battery being supplied by a type-c charger or a power bank);
- 18650 Battery Case (75.8x25.8x19.6mm);
- 10x15 mm button;
- Wires and a soldering iron with accessories;
Support creator here: