1 / 4
Zweifarbiger Salamander, Dual color salamander — zdjęcie 1
1 / 4

Zweifarbiger Salamander, Dual color salamander

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gelbe Flecken teilweise eingebettet Yellow spots partially embedded

Ocena
4,333 / 5
Polubienia
55
Pobrania
293
Wydruki
3
Wyświetlenia
948
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Animals
Licencja
Creative Commons — Attribution

Der schwarze Körper ist so verändert, dass die gelben Flecken nur teilweise eindringen. Der Bauch bleibt schwarz. Stützen verwenden.

Die gelben Flecken sind unten gekürzt. Anstatt der Bauchplatte wird nur ein Rand zum Drucken benutzt. Danach die Flecken einzeln einsetzen.

Toleranzen der gelben Flecken so angleichen, damit sie in die Löcher passen

Für Doppel- oder Mehrfach-Extruder ist der Versatz der gelben Flecken X+0,17 / Y+2,54 / Z+2,3 mm.

Am 27.09. wurden die STL-Modelle getauscht.

 

The black body is modified that the yellow spots only partially penetrate. The belly remains black. Using supports.

The yellow spots are shortened at the bottom. Instead of the abdominal plate, only a brim is used for printing. Then insert the spots individually.

Adjust tolerances of the yellow spots so that they fit into the holes

For dual or multiple extruders, the offset of the yellow spots is: X+0.17 / Y+2.54 / Z+2.3 mm.

The 27/9 were changed the STL models.

 

 

Tagi