Wall Mounting Retention Tabs (for Boards, Mirrors, etc.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small retention tabs that screw into the wall to hold thin objects like mirrors or whiteboards, etc.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
These are simple tabs meant to hold mirrors, boards, posters and the like to your wall. Both the depth and counterbore should be easy to edit in Fusion360 (or your program of choice) if you need different specifications.
I suggest printing them with 3 walls, 3 top, 3 bottom layers, 0.3 layer height, and at least 15% infill (I normally use Support Cubic.)
Print them upside down, no supports needed! Add ironing @ 15% (or whatever your printer is tuned for) to get a smooth finish on the wall/object mating surfaces.
If you found this model helpful, please consider liking or leaving a quick comment. The positivity is greatly appreciated! <3