1 / 3
Single Extruder - Dual Color - Zelda Chuchu (fusion360)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Zelda Chuchu model modified with the dual color technique. The model prints in two part that slide into each other.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Share Alike
The fusion360 file is given would you like to see how I did it, to modify it , …, or if you simply want to adjust the tolerances to your needs for example.
The model depicts a chuchu from “The Legend of Zelda” series (breath of the wild and tears of kingdom games). See https://zelda.fandom.com/wiki/Chuchu for more info.
Printing info:
- Scaling the model can be tricky since the tolerances will scale accordingly aswell, I recommend tweaking the tolerances in fusion first, then to scale it as you wish.
- Split the model to its parts before printing them separately then, when done, they should simply slide into each other
- Regular supports are recommended to support the overhangs