1 / 6
paper shredder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It can cut up to 5mm.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 1102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a paper shredder. It can cut up to 5mm.
It has two versions.
(A4 version use for cutting paper: width ≤210mm , A5 version use for width ≤150mm )
A4 version is apply to printer bed ≥250 mm
A5 version is apply to printer bed ≥180 mm
Installation instruction is shown in the picture.
special tips:
you need a wallpaper blade, and break off two parts with plier (see picture. ) after inserting blade.( Be careful your hand)
The blade must be sharp,and blade point stay out.
This model was printed using PLA. (fill in 10%,using a lower layer hight 0.2mm,no support)