1 / 3
NASA inspired 5v LED lampshade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I seen lots of other people making and designing LED lampshades so I wanted to have a go at designing some.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
My First design of a lampshade. I used a 5v LED strip. I know the inside where the led strip goes could be better, the plan was to hook the LED strip around the holes as I thought that would be a good idea since I wanted it to show the NASA logo on both sides. It does fit together really tight though and no glue is need as it sticks together really strong.
ANY feedback is greatly appreciated!
I printed this on a 2T Prusa XL scaled at 90%