Murmulator Keyboard case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case specifically for the Murmulator emulation computer based on the raspi Pico.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case specifically for the Murmulator emulation computer based on the raspi Pico. It is based on a design ( https://www.thingiverse.com/thing:6759358 ) for the TTGO VGA based ESpectrum.
Modifications are to the design for the K1000 keyboard and include a printable “On” led lens and keyboard wording changes as well as appropriate mounts and cutouts for the Murmulator board. The board I used was the first murmulator PCB but I expect it will aldso fit the latest V1.4 board.
Details for the murmulator project can be found here: https://murmulator.ru
Print in whatever colours you like but the LED lense is best in a clear filament. and is designed for a 3mm LED to be fitted behind it and hot snotted into place. Connect through something like a 1K resistor to 5V and GND on the murmulator PCB.
I super glued the text and colour flash onto the front of the case as shown in the pictures.