1 / 2
Sovol SV08 Shroud - Bambu Clone HE - V6 Nozzles - and Eddy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added v2 Minimal changes - Took some bulk from the side clips and filled in the missing hole from the Eddy side bracket
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 70
- Wydruki
- 1
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (23)Powiązane
V2 - Moved bottom retaining legs, more weight saving, added more strengthening areas and slimmed down the width a touch more, added rounded brace near fan outlet for Bambu HE cooling.
===================================================================
Had to make a couple of little changes to suit me better - slimmed down the side brackets so its a little more flimsy, filled a long rectangular hole from the original to toughen up the side where the eddy is.