1 / 4
Dacia Sandero III Coat hook Kleiderhaken — zdjęcie 1
1 / 4

Dacia Sandero III Coat hook Kleiderhaken

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Coat hook for Dacia Sandero III or perhaps other Dacia models with handle above the rear seats

Ocena
0 / 5
Polubienia
9
Pobrania
76
Wydruki
0
Wyświetlenia
464
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Dacia Sandero has hangers above the rear doors, but the usual coat hook is missing. 
I have designed a coat hook that is divided into two parts and is clamped together with an M5x 15 or M5x 16 screw. The screw head must be less than 9 mm in diameter.
Printed with ABS filament due to the temperatures that can occur inside the car in summer. PLA can deform under load. I have not tested PETG!

Beim Dacia Sandero sind zwar hinten Hangriffe über den Türen, aber der übliche Kleiderhaken fehlt. 
Habe dafür einen Kleiderhaken entworfen der Zweigeteilt ist und mit einer Schraube M5x 15 oder M5x 16 zusammen geklemmt wird. Der Schraubenkopf durchmesse muss kleiner 9 mm im Durchmesser sein. 
Wegen der Temperaturen die im Sommer im inneren des Wagens auftreten können, mit ABS Filament gedruckt. PLA kann bei Belastung sich verformen. PETG habe ich nicht gestest!

Layer height: 0.2 mm or 0.16 mm
Wall loops: 3
Infill: 50%
No support for Kleiderhaken Part1-F
Support for  Kleiderhaken Part2-FWinkel may be
Outer Brim only