1 / 2
Kobra 2 neo z-axis filament holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
soporte para tubo de teflón para anycubic kobra 2 neo
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
Anycubic Kobra 2 neo filament holder
I'm a newbie but it works.
I redesigned it to fit a higher spool configuration and to prevent the filament from bending hard on the left side with the original tube location. Calibrate maximum height to avoid twisting the filament tube.
It is necessary to replace the original upper screws with longer ones.
Printing time
Printing time takes 12 min on the Kobra 2 neo with speed at a 100%
Mounting
Two M5x40mm