Pokemon Go Plus+ Pokemon go plus plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gotta catch'em all
- Ocena
- 4,5 / 5
- Polubienia
- 23
- Pobrania
- 586
- Wydruki
- 2
- Wyświetlenia
- 2982
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I myself designed this device to aid in catching the pokemons
Maybe you too, would like to catch the pokemons
I printed at .15 mm layer height with organic supports
I eliminated my speaker to make room
Link to micro switch → Switch
There are videos on YouTube showing how to wire the switch in. Feel free to reach out if you have any questions/comments/concerns
PS. I made this in 3d builder. Its not perfect, obviously.
Cheers
-Edit: Added more clearance for the usb c board.
Install instructions
I recommend installing the object while the board is removed for soldering. I also recommend removing the USB board and letting it “float” while inserting the object. The object doesn't fit in very well when the circuit board is installed.