HSW Jumbo Glue Support (22 grams)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue support for large glue sticks (specifically scaled for Elmer's 22 g glue stick)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: Apologies to anyone who downloaded this before 11/17/2025. I had accidentally uploaded the orginal file, instead of the enlarged one. It is fixed now!
If you use a bit of glue to help with adhesion on your build plate, this will provide a convenient place to store it near your printer. This is a super simple and quick print, but it will make your life a little more organized.
There are two files to choose from and both work with the Honeycomb Storage Wall system:
- The one ending with “22g” is a perfect fit for the Jumbo Elmer's Gluestick. This one has an opening with a diameter of 28mm.
- The one ending with “21g” is a perfect fit for many of the proprietary 21g gluesticks (like the Elegoo gluestick shown in the picture). This one has an opening with a diameter of 26mm.
If you aren't sure which one to print, you can always print the bigger one and it will work for either.