1 / 3
V6 Can Cooler (Air cooled and standard heads) — zdjęcie 1
1 / 3

V6 Can Cooler (Air cooled and standard heads)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple cooler in the style of a V6 fits 6 cans and has either standard or air-cooled heads.

Ocena
0 / 5
Polubienia
8
Wydruki
0
Wyświetlenia
310
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Commercial Use

A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my Voron's buildplate, so I made this V6 to fit  regular sized cans. In the files there is a standard heads and an air-cooled version with fins.

Printing notes:

layer hight:0.2

Infill: 7%

Walls:3

Partcooling:100%

surfaces: 5 top and 5 bottom

total print weight should be between 1700g to 2100g depending on setting adjustments

The washer should be printed in TPU or just buy a washer with an ID of 14mm.

 

Also sold as a complete print over on Etsy under the seller “GlacierFrost” if you want one!

Tagi