LED lampoon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A LED lampoon I made for my kids.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Every year there's this thing around my neighbourhood called de lichtjesstoet, all kids walk around in a parade with simple lampoons & candle and sing songs. I wanted my kids to stand out, so I designed a lampoon powered with LEDs, controllable by Bluetooth.
To be able to build your own lampoon you'll need:
- an ESP32 (or ESP8266 if you don't need Bluetooth)
- an 8x32 LED WS2812B panel
- a USB power bank (or other type of battery)
I printed mine with glow in the dark PLA for an extra cool effect, but white will work as well. 0.2mm layer height should be fine.
There's a slot for your ESP, I use tape to keep mine in place. Connect the LED panel & you are good to go.
The parade was canceled this year (COVID) and the software I wrote is far from publishable, but you could flash WLED or the WS2182FX autocycle example to get something that will wow your kids.
This print consists of 2 parts:
- The base
- The top lid
Because the battery pack I had laying around was huge I made an alternative version of the lid with some extra space so it could stick out.