AEG Mitre Saw Zero Clearance Throat Plate Insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB)
The insert is split into two identical pieces to fit most print beds. Together, they form a perfect replacement for the stock throat plate, while also providing zero clearance for virtually no tearout. Simply use the six bolts that come preinstalled with the saw to secure the zero clearance insert in place. Once installed, make a single cut, and you'll have a perfect zero clearance slot for cutting. Depending on the printer tolerances, you may need to use a 4.5mm drill bit to widen the inset screw holes if necessary.