1 / 8
Qidi X-Max 3 Racquetball Feet — zdjęcie 1
1 / 8

Qidi X-Max 3 Racquetball Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Racquetball Feet for the Qidi X-Max 3 to quite noise and vibration traveling through the table.

Ocena
0 / 5
Polubienia
23
Pobrania
85
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Racquetball Feet for the Qidi X-Max 3. Uses the OEM screws from the factory feet. I got the idea from the many squash ball designs out there (I did squash ball feet on my Prusa Mini). I found that squash balls would not be strong enough to support the weight of the Qidi (65 pounds), so I decided to use racquetballs because they are harder and larger than the squash balls.

These feet reduce the amount of vibration and noise by dampening through the racquetballs.

I printed in CA Filament Black PETG, but it could be done in PLA or ABS.

I used these racquetballs ordered from Amazon. 

Amazon.com : Penn Racquetballs (Pack of 12), Blue : Tennis Balls : Sports & Outdoors

I included .stl and .3mf files. They can be printed without supports if your calibrated well and slow down the overhangs enough.

Tagi