Anycubic Kossel Plus E3D V6 Volcano fan duct for stock effector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan duct for the longer V6 Volcano Hotend that fits on the stock effector of the Anycubic Kossel Plus. Very simple…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 568
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Fan duct for the longer V6 Volcano Hotend that fits on the stock effector of the Anycubic Kossel Plus.
Very simple design with minimal airflow restriction.
I am using it with a clone hotend, so tolerances might vary a bit, also depending on how deep the nozzle is screwed in. Just scale Z size in the slicer to get the best fit.
Should be printed with no supports. Mine is in PLA and holds up without melting, the distance from the hotend is pretty far, however, make sure to use a silicone sock.
With 45+c heatbed or no sock better print with ABS / PETG to avoid drooping.
Please check out my E3D housing for the complete solution to mount the V6 on a stock effector:
https://www.thingiverse.com/thing:4152852
CAD files are included!
Print Settings
Printer Brand:
Anycubic
Printer:
Kossel
No
Supports:
No
.2
Notes:
no support
Category: 3D Printer Parts