Advanced overhand test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An advanced overhang test to accurately specify what angle you can print overhangs at, depending on what printer and…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
An advanced overhang test to accurately specify what angle you can print overhangs at, depending on what printer and material you are using.
it uses a small amount of material of around 5-15g, depending what size you print, and it tests overhangs ranging from 45 degrees, all the way up to 80 degrees, this print can be a torture test for your printer since it also has many small towers to test your retraction settings, as well as if you need z-hop or not.
this also tests bridging, where for smol print, it has a maximum bridging distance of 56mm, and each overhang width is 7.5mm, for the normal size, the maximum bridging distance is 76mm, with 10mm overhang width.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2
Infill:
doesn't matter
Category: 3D Printing Tests