Reinforced camping gas stove adjustment knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustment knob for an old Edelrid international camping gas stove
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
My lovely co-worker blessed me with another project :). The original knob of her camping gas stove broke due to thin walls and years of usage. My design is a snug fit and has thick walls.
It is recommended (but not really necessary) that you print with 100% infill. I have used PETG for a little flex but you can also use PLA and ASA filaments:
PLA | |
| SUNLU PLA Plus | Amazon |
| Amazon Basics | Amazon |
| GEEETECH Filament PLA | Amazon |
| ELEGOO PLA+ | Amazon |
| eSUN PLA+ | Amazon |
| JAYO PLA+ | Amazon |
PETG | |
| eSUN PETG Filament | Amazon |
| OVERTURE PETG Filament | Amazon |
| ERYONE PETG Filament | Amazon |
| SUNLU PETG Filament | Amazon |
| Polymaker PolyLite PETG | Amazon |
| FormFutura - ReForm - rPET | Amazon |
| extrudr® XPETG | Amazon |
| TECBEARS PETG | Amazon |
| GIANTARM PETG | Amazon |
ASA | |
| extrudr® DuraPro ASA | Amazon |
| Polymaker PolyLite ASA | Amazon |
| AzureFilm 3D Black | Amazon |
| eSun ASA | Amazon |
Please note that the links are affiliate Amazon links. Feel free to click on them to support me. :) Apart from that, you can also support my work by buying me a coffee.
If you print one, please post a make! If you encounter any issues, post a comment. Thanks!