1 / 2
Reliance Aqua-Tainer Plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two versions of a plug for the Reliance Aqua-Tainer water containers. One is solid, and one has a threaded M12 hole
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
I like using the 7-gallon Aqua-Tainer container as the water reservoir for the misting system I use for my pet gecko because the ¼" tubing I use for my MistKing system fits perfectly within the built-in air vent hole. However, I needed to make a new air hole for the system, which is where this plug comes in.
- The M12 plug is a plug for the hole in the main cap that contains a threaded M12 hole through it. You can use this hole to screw in any M12x1.5 vent cover.
- I tested with the following air vent plugs from Amazon:
- The blank plug can seal the whole system, or be modified however you want.