1 / 1
IKEA Forsa Lamp Magsafe charger base — zdjęcie 1

IKEA Forsa Lamp Magsafe charger base

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nice looking Magsafe charger shell for the IKEA Forsa lamp base

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
375
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution

I love my new Forsa lamp from IKEA. It's just right for my favourite reading spot. I was thinking that it would be great if they made it with a wireless phone charger in the base, so I came up with this simple 3D print. It works a treat!

This is the IKEA Forsa lamp: https://www.ikea.com/gb/en/p/forsa-work-lamp-black-80106012/

An Apple Magsafe charging puck slots into the shell and then the whole thing fits over the original Forsa lamp base. Any charging puck with the same dimensions as the Apple one should work.

To print it, just rotate it 180 degrees so that it's upside down. No supports are necessary. I've used a double chamfer around the top edge which looks nicer that a fillet. It looks quite nice with a fuzzy skin on the outside edges only, if you'd like to try that option in your slicer. I've printed it in PETG and PLA, both work well. Be careful when peeling it from the print bed as the material above the charging puck is only a couple of layers thick in order to improve charging efficiency.

Tagi